Measuring low-voltage test points on particular X-ray machines has required an oscilloscope which could be a time-consuming measurement. The new X2 Volt Sensor makes it easier than ever to perform these measurements. With its intuitive interface and automatic capture of waveforms, the X2 Volt Sensor can reduce the time for the test procedure by as much as 90 percent over traditional measurement methods. The X2 Volt Sensor works like a combination of a voltage multimeter and oscilloscope in the range of ±16 V, which covers the applications needs in diagnostic X-ray rooms. It can also be used for connecting other measurement devices providing a voltage signal between ±16 V, such as a mAs clamp for non-invasive mAs measurements. For faster data analysis, built-in conversion factors can be selected in the base unit to calculate and display the corresponding kV or mA/mAs.
For more information, visit www.raysafe.com/x2volt.